Manufacturers APS Chip Sets Modules and Boards FCB - Interface Board
 |
APS FCB500 Interface board
|
| Specifications: | ||||||
| Printing Mechanisms |
HSP3500/HSP2500 | |||||
| Presenter Support | Stepper motor Contro and two opto sensors | |||||
| Print Speed |
Up to 250mm/sec |
|||||
| Exit bezel LED port | Can drive up to 8 LEDs | |||||
| Keyboard Interface |
Online/Offline, paper feed, and status LEDs |
|||||
| Extension Ports |
24V Power 3.3V Power UserI2C Interface or 2 digital I/O General Purpose I/O (2 digital or analog) |
|||||
| Interfaces |
RS232, USB 2.0 , Ethernet(RJ45) |
|||||
| Barcodes |
UPC-A, UPC-E, EAN13, CODE39, ITF, and CODABAR | |||||
| Print Mode |
Page mode / Line Mode | |||||
| Emulation | ESC/POS | |||||
| Firmware | Flash upgradeable | |||||
| Operating temp | -20 - +70 |
|||||
| EMC Standard | Designed to comply with FCC/CE Class B | |||||
| Voltage Range (V) | 24 +/- 10% | |||||
| Currnent Consumption(A) | 1-7, 3.5 typical | |||||
